The FS-02 is a proprietary control console developed to power speakers and CTG manufactured microphones. The FS-02 system solution is designed for group audio and videoconferencing applications in small to mid-sized rooms. It supports up to two CTG microphones and focus speakers. The FS-02 typically connects at line level to a video codec and functions as a peripheral audio system. Adding the CTG or other telephone interface provides stand-alone audio conferencing capabilities to the system.

The FS-02's all in one design replaces the need for a separate microphone mixer and speaker amplifier. There are a few simple calibration adjustments to be set during installation. The user adjusts the incoming audio levels from the remote control supplied with the telephone interface and videoconferencing system. All microphones may be muted through the codec or the telephone interface. The audience ceiling or table microphones may also be muted through the FS-02 while a presentation microphone (line input) remains active.

Features/Benefits

• Expands microphone and speaker coverage areas
• Provides ceiling based solution eliminating need for cables on the table or floor
• Pre-engineered field tested solution
• Gives comfortable listening levels to the near and far ends
• Easy set up and calibration procedure
• Problem free operation
• Permits selection of a videoconference or an audio conference with the optional CTG or other telephone interface
• Line level connection for lapel, podium, or other types of presentation microphones, or program audio source
• Record jack enables recording of both the local and distant audio

Typical Configurations

Specifications

1. Power supply connector
2. Speaker 1 and 2
3. Speaker 3 and 4
4. Send level trim pot
5. Line Out - Send audio to telephone interface
6. Line In - Receive audio from telephone interface
7. Line Out - Send audio to video codec
8. Line In - Receive audio from video codec
9. Record Out - Records near and far end of conference
10. Line In - Presentation microphone or program audio
11. Input gain trim (line level)
12. Microphone mute (1 and 2 only)
13. Microphone input 2
14. Microphone input 1

Physical Dimensions: 19”w (48.26 cm) x 1.75”h (4.45 cm) x 4”d (10.16 cm)
Weight: 3.4 lbs (1.5 kg)
Microphone inputs: 2K Ohms + 12VDC phantom power Maximum 2 microphones Designed for CTG manufactured microphones
Line Input: Balanced input: 0dB nominal level (adjustable) Input impedance 20K Ohms
Audio & Video Conference Inputs: Frequency Response: 20Hz – 20KHz
Audio & Video Conference Outputs: Frequency Response: 20Hz – 20KHz
Speaker Outputs: 8 Ohms nominal, minimum load 2 Ohms Maximum 4 speakers
Record Output: Unbalanced output: 10 dBm nominal level Output impedance: 1K Ohms
Power Requirements: 27V AC 50/60 Hz 0.5 Amp. Plug in power supply included

For Additional information on the FS-02 Teleconference Interface please refer to the following PDF documents:

FS-02 Teleconference Interface Specifications

FS-02 Teleconference Interface Manual