The FS-200 is a proprietary control console developed to power speakers and CTG manufactured microphones. The FS-200 system solution is designed for group audio applications in small to mid-sized rooms. It supports up to two CTG microphones and four speakers. The FS-200 can connect at line level to a video codec and functions as a peripheral audio system.

The FS-200’s all in one design replaces the need for a separate microphone mixer and speaker amplifier. There are a few simple calibration adjustments to be set during installation. The user adjusts the incoming audio levels from the remote control supplied with the telephone interface and video-conferencing system. All microphones may be muted through the codec or the telephone interface. The audience ceiling or table microphones may also be muted through the FS-200 while a presentation microphone (line input) remains active.

Features/Benefits

• Expands microphone and speaker coverage areas
• Provides ceiling based solution eliminating need for cables on the table or floor
• Pre-engineered field tested solution
• Gives comfortable listening levels to the near and far ends
• Easy set up and calibration procedure
• Problem free operation
• Permits selection of a videoconference or an audio conference with a telephone interface
• Line level connection for lapel, podium, or other types of presentation microphones, or program audio source
• Record jack

Typical Configurations

Specifications

1. Power supply connector
2. Speaker 1 and 2
3. Speaker 3 and 4
4. Send level trim pot
5. Line Out - Send audio to telephone interface
6. Line In - Receive audio from telephone interface
7. Line Out - Send audio to video codec
8. Line In - Receive audio from video codec
9. Record Out - Records near and far end of conference
10. Line In - Presentation microphone or program audio
11. Input gain trim (line level)
12. Microphone mute (1 and 2 only)
13. Microphone input 2
14. Microphone input 1

Physical Dimensions: 19”w (48.26 cm) x 1.75”h (4.45 cm) x 4”d (10.16 cm)
Weight: 3.4 lbs (1.5 kg)
Microphone inputs: 2K Ohms + 12VDC phantom power Maximum 2 microphones
Line Input: Balanced input: 0dB nominal level (adjustable) Input impedance 20K Ohms
Audio & Video Conference Inputs: Frequency Response: 20Hz – 20KHz
Audio & Video Conference Outputs: Frequency Response: 20Hz – 20KHz
Speaker Outputs: 8 Ohms nominal, minimum load 2 Ohms Maximum 4 speakers
Record Output: Unbalanced output: 10 dBm nominal level Output impedance: 1K Ohms
Power Requirements: 27V AC 50/60 Hz 0.5 Amp. Plug in power supply included

For Additional information on the FS-200 Control Console please refer to the following PDF documents:

FS-200 Control Console Specifications

FS-200 Control Console Manual