The Speaker enclosure will require a 6 5/16 inch (160mm) mounting hole in the ceiling material. Tile bridges are supplied to support the weight in 2' x 2' or 2' x 4' acoustic tile ceilings. A connection point for support wires is also provided on the rear to meet installation requirements in earthquake prone areas. Complete installation instructions and cutting template are included with the speakers.
The connection screw terminals are located under a metal cover plate at the rear of the unit. The speaker should be used with 8 Ohm bypass setting for FS-200 installations. A switch is located under the speaker grill to change settings, use the 8 Ohm bypass position.
- Provides a clutter-free environment
- Distributes even sound for the conference area
- Full room sound for large conference spaces
SP-02 Ceiling Speaker Module (Atlas Sound FAP40T)
Speaker Size: 4 inch (10cm) Polypropylene
Magnet Weight: 13oz (369g)
Frequency Response: 80Hz – 15KHz +/- 5dB
Impedance: 8Ohms
Power Taps: 1, 2, 4, 8, 16 Watts
Sensitivity: 87 dB
Power Handling: 16 Watts (8 Ohms)
Dispersion: 130 Degrees
Mounting Hole Diameter: 6.312 inches (160mm)
Bezel Diameter: 7.375 inches (187mm)
Enclosure Overall Height: 7.125 inches (181mm)
Shipping Weight (Pair): 15 pounds (33Kg)
SP-02
Ceiling Speaker Module Specifications

|